I have a Cisco 2611 running 12.0(3)T3
It was working fine until i added up some links on the 8AS card. For
instance this morning it gave this Memory Allocation Failure.
Whenever this happens, the network traffic stalls, and on the terminal
console there is always a memory allocation error like below. On restart, it
boots up fine but takes like 5 to 10 minutes nothing being displayed on the
terminal and things resume though at a slow pace, i do a reload and after
that it resumes back to normal.
Sys-2-mallocFail: Memory allocation 0f 276 bytes failed from 0x80217E1C,
-Process="IP Input", ipl=6, pid=23,
-Traceback=802475D0 8024896C 8021
Anyone experienced this before and if so.. whats the cause and how best can
i deal with this. It happens like once or twice a week but its never the
same error message.
----- Original Message -----
From: George Robbins <email@example.com>
To: <firstname.lastname@example.org>; <email@example.com>
Sent: Monday, April 09, 2001 7:04 PM
Subject: Re: problems using RSP8 on 7505
> upgrade to 12.1(7) unless you like known bugs...
> alernatives being 12.1(5)T5 or 12.1(6)E if
> you're not on the standard train...
> beyond that, make sure that you have appropriate
> route-caching, including route-cache same-interface
> on your fast-e's.
> > From firstname.lastname@example.org Mon Apr 9 10:41:41 2001
> > Date: Mon, 9 Apr 2001 10:34:16 -0400
> > X-From_: email@example.com Mon Apr 9 10:34:15 2001
> > Received-Date: Mon, 9 Apr 2001 10:34:15 -0400
> > From: "Crundwell, Richard" <firstname.lastname@example.org>
> > To: "'email@example.com'" <firstname.lastname@example.org>
> > Subject: problems using RSP8 on 7505
> > Old-Date: Mon, 9 Apr 2001 10:27:34 -0400
> > Old-X-Envelope-To: cisco-nsp
> > Resent-From: email@example.com
> > Resent-Date: Mon, 9 Apr 2001 10:37:00 -0400
> > Resent-To: firstname.lastname@example.org
> > X-Mailing-List: <email@example.com> archive/latest/6024
> > X-Loop: firstname.lastname@example.org
> > Precedence: list
> > Resent-Sender: email@example.com
> > Was running 12.1(2)
> > has anyone experienced any problems running RSP8's on a 7505? We've run
> > several of these in 3 different routers all run fine until we put some
> > on them. Problems we've experienced. router begins to reboot. Fast E
> > internal network takes massive errors and failed (even when moving to
> > alternalte fast e's on router.
> > We've RMA'd 4 rsp8 and replacements begin to do the same thing. Any
> > folks?
> > Richard W. Crundwell
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:34 EDT