[nsp] REG: MPLS on Cisco routers.

• Next message: Trent Fierro: "Re: AS5800/AS5300 & ISDN"
• Previous message: Gert Doering: "Re: [nsp] Tracking down changes in interface SNMP ifIndex's"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

Dear All,

I am looking out to figure out whether the Cisco 3640 router will support
the following

1. TE with OSPF support

2. LDP

3. OSPF as the PE-CE routing protocol.

A doc on the Cisco site states that the above mentioned is possible on the
Cisco 3600 series with the following IOS
versions -

12.0(11)S and 12.1(3a)T.

The URL is as follows - "http://www.cisco.com/warp/customer/105/mpls_te_ospf.html".

But when I try to download the IOS Software, the above mentioned versions
are not compatible with the Cisco 3600 routers, & is only supported on the
72xx, 75xx, GSR routers.

Kindly advise me on whether the above mentioned features are supported on
the Cisco 3640 router.

With warm regards,

Vinod.

• Next message: Trent Fierro: "Re: AS5800/AS5300 & ISDN"
• Previous message: Gert Doering: "Re: [nsp] Tracking down changes in interface SNMP ifIndex's"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:35 EDT