Re: [nsp] frame-relay lmi-type

From: Siva Valliappan (svalliap@cisco.com)
Date: Fri May 18 2001 - 18:57:24 EDT

Next message: George Robbins: "Re: Noisy/Vibrating PSU on 7100-series router?"
Previous message: Kevin Gannon: "Re: [nsp] rate-limit and routing updates"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

we have supported the configuration of different frame-relay lmi types at
least as far back as 10.x (and maybe 9.x). can you provide more
information on the problem you saw in 11.x?

thx
.siva

On Fri, 18 May 2001, Nour Rabii wrote:

> hello ,
>
>
> what IOS should i use in cisco3640 in order to can configure frame-relay " ?
>
> in IOS 11 the Command " frame-relay lmi-type " don't appear on the configuration .
>
> Best regards .
>

Next message: George Robbins: "Re: Noisy/Vibrating PSU on 7100-series router?"
Previous message: Kevin Gannon: "Re: [nsp] rate-limit and routing updates"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:38 EDT