If you have a T3 and want to provision it in 1MB increments to different customers at a site what are the command options? (I.E. what software commands would allow me to do this).
So for example say I have one customer wanting 10MB and another wanting 3MB and the rest of the T3 unused for future customers - what options do I have and can you give me some examples or references on where to look on CCO?
I suspect CAR or similar. If so what happens to traffic once it reaches the 10MB threshold. And if a customer wants to temporarily change his max CIR so to speak to say 15MB is that easily done?
Thanks in advance.....
___________________________________________________________________________
Visit http://www.visto.com/info, your free web-based communications center.
Visto.com. Life on the Dot.
From jared@puck.neth;et
Received: (from jared@localhost)
by puck.nether.net (8.11.1/8.9.3) id f4L7YSo31998
for cisco-;pu
(envelope-from jared)
Resent-Message-Id: <200105210734.f4L7YSo31998@puck.n;r.
ReCeived: (from slist@localhost)
by puck.nether.net (8.11.1/8.9.3) id f4L10Vs27363
for jared; Sun, 20 May 2001 21:0; -
(Envelope-from cisco-nsp-request@puck.nether.net)
Date: Sun, 20 May 2001 21:00:31 -0400
X-From_: mnazri@mimos.my Su;y
Received: from someone claiming to be
ew.mimos.my (ew.mimos.my [192.228.129.34])
by puck.nether.net (8;1/
for <cisco-nsp@puck.nether.net>; Sun, 20 May 2001 21:00:30 -0400
(envelope-from mnazri;os
ReCeived-Date: Sun, 20 May 2001 21:00:30 -0400
Received: from localhost (mnazri@localhost)
by ew.mimos.my (8.9.3/8.9;wi
Mon, 21 May 2001 09:00:09 +0800 (MYT)
Old-Date: Mon, 21 May 2001 09:00:09 +0800 (MYT)
From: Mohd Na;Is
X-Sender: mnazri@ew
To: Denis Saveliev <Denis.Saveliev@energis-squared.com>
cc: cisco-nsp@puck.neth;et
In-Reply-To: <6BF1C330AF53D311BE5D00508B09081004F9DCC7@PLANET01>
Message-ID: <;.G
X-Diagnostic: Not on t;cc
X-Envelope-To: cisco-nsp
Resent-From: jared@puck.nether.net
Resent-Date: Mon, 21 May 2001 03:34:28 -0400
Resent-T;is
Thank for your help,
Here is our IOS and Mica modem IOS :-
Need we upgraded our IOS to version 1;0.
12.1(1)DB. Please advise.
BKJ24-Jaring#sh flash
System flash directory:
File Length Name/stat; 1
2 468984 mica-modem-pw.2.7.2.0.bin
ROM: System Bootstrap, Version 12.0(2)XD1, EA;DE
1)
BOOTFLASH: 5300 Software (C5300-BOOT-M), Version 12.0(4)T1, RELEASE
SOFTWARE (fc1)
--na;ac
> Th
>
> Bug Id : CSCdp33819
> Headline on TTY lines process virtual-exec is runni;no
> Version Found 12.0(5)T01
> Fixed-in Version 12.1(0.4) 12.1(0.5)T 12.1(1)DC 12.1(1)DB
>
> Re;e
>
> the Virtual Exec process is running on the modem even w;no
> connected. This situation does not affect the allocation of the modem for
> subsequent sessions. The next u;th
> condition. There is no workaround.
>
> Hope this helps.
>
> Denis Saveliev
> N;rk
> Energis Squared
> DDI: +44 (0) 113 207 6188
> Fax: +44 (0) 113 234 6065
> Mob: +44 (0) 7899 995 996
>
>
> > ;-O
> > From: Mohd Nazri Ismail [mailto:mnazri@mimos.my]
> > Sent: 18 May 2001 01:54
> > To: cisco-nsp@pu;et
> > Cc: tam; Alessandro Chiolo; Nikki Mehta; Cisco-Nas (E-mail); Cisco-Nsp
> > (E-mail)
> > Subject: [nsp] AS5300 ;gg
> >
> >
> >
> >
> > Hello Everybody, I need some help here.
> >
> > We are using Cisco AS5300,
> > I n;ll
> > terminal after
> > dialing) to check the login process and found th;om
> > Modems just hang
> > after presenting you with the login screen. It cannot accept
> > input from my
> > keyboard a; d
> > it returns a
> > timeout message! It looks like when there are many use;nl
>
> > When we run command 'show users', it will show a lot of '
> > Virtual Exec',
> > default only 5 'Virtual ;'
> > that.
> >
> > After i reboot/reload my AS5300, it will back to normal and
>;ur
> > dial in without any problem to AS5300. This problem will
> > happen again in
> > the future.
> >
> >
> > Anyone from this group have faced this problem. Please help me.
> >
> > thank you a lot.
> >
> > --nazri/access
> >
>
>
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:38 EDT