Hello,
Try "redistribute static subnets" under "router ospf 10"
Chris Davis
Site Engineer
www.ComputerJobs.com
Upgrade Your Future
-----Original Message-----
From: Freeserve (E-mail) [mailto:steve@godus.freeserve.co.uk]
Sent: Monday, May 21, 2001 12:26 PM
To: cisco-nsp@puck.nether.net
Subject: [nsp] OSPF not distributing 1 interface
Hi,
I have a strange problem with OSPF.
The config is a very simple one area, one network statement. I have a /30
joining to routers over Ethernet and basically neither of the routers is
redistributing this connected link into OPSF?
The 2 routers have other connections in the same network range and these are
being redistributed ok to the other 10 routers on the network?
If anyone has any ideas I would appreciate it.
Here is the config:
ROUTER 1:
interface FastEthernet0/0
description ******* HG1-PE4 ********
ip address 10.0.16.30 255.255.255.252
ip ospf cost 5
duplex auto
speed auto
tag-switching mtu 1600
tag-switching ip
no cdp enable
router ospf 10
log-adjacency-changes
network 10.0.0.0 0.255.255.255 area 0.0.0.0
ROUTER 2:
interface FastEthernet2/1
description ****** HG1-PE5 ******
ip address 10.0.16.29 255.255.255.252
ip ospf cost 5
duplex auto
speed auto
tag-switching mtu 1600
tag-switching ip
router ospf 10
log-adjacency-changes
passive-interface Serial3/0.2
network 10.0.0.0 0.255.255.255 area 0.0.0.0
Thanks in advance
Steve.
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:38 EDT