[nsp] OSPF not distributing 1 interface

From: Freeserve (E-mail) (steve@godus.freeserve.co.uk)
Date: Mon May 21 2001 - 12:26:11 EDT

Hi,
I have a strange problem with OSPF.

The config is a very simple one area, one network statement. I have a /30
joining to routers over Ethernet and basically neither of the routers is
redistributing this connected link into OPSF?

The 2 routers have other connections in the same network range and these are
being redistributed ok to the other 10 routers on the network?

If anyone has any ideas I would appreciate it.

Here is the config:

ROUTER 1:

interface FastEthernet0/0
 description ******* HG1-PE4 ********
 ip address 10.0.16.30 255.255.255.252
 ip ospf cost 5
 duplex auto
 speed auto
 tag-switching mtu 1600
 tag-switching ip
 no cdp enable

router ospf 10
 log-adjacency-changes
 network 10.0.0.0 0.255.255.255 area 0.0.0.0

ROUTER 2:

interface FastEthernet2/1
 description ****** HG1-PE5 ******
 ip address 10.0.16.29 255.255.255.252
 ip ospf cost 5
 duplex auto
 speed auto
 tag-switching mtu 1600
 tag-switching ip

router ospf 10
 log-adjacency-changes
 passive-interface Serial3/0.2
 network 10.0.0.0 0.255.255.255 area 0.0.0.0

Thanks in advance

Steve.

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:38 EDT