David Bergum <bergum@cisco.com> writes:
> Just configure them as passive interfaces in OSPF; then you don't
> send hello's out there and attmpt to find adjacencies. They will
> be redistributed in the router lsa. If you redistribute them as
> externals, then each interface is announced as a separate type 5
> lsa, which is flooded over the whole network. Much more efficient
> to carry all your infrastructure as internals.
...and on Catalyst RSM/RSFC/MSFCs with many VLANs, the
'passive-interface default' command is your friend...
M.
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:39 EDT