At 04:25 PM 5/21/2001 -0400, Barry Wright wrote:
>Try "redistribute connnected subnets" under "router ospf 10" instead.
Steve,
The redistribute trick will work, but question remains why the network
statement under ospf is
not picking up this interface.
taking a look at database and routing table may be good start
please provide
sh ip route 10.0.16.30
sh ip ospf database router <router ID of R1>,
repeat for R2
It may have been the case that OSPF did not pick this interface by mistake,
removing the network statement and
reinsertion may trigger it
Hope this helps
Zaheer
>-----Original Message-----
>From: Chris Davis [mailto:chris.davis@computerjobs.com]
>Sent: Monday, May 21, 2001 12:45 PM
>To: 'steven.godfrey@intechnology.co.uk'; cisco-nsp@puck.nether.net
>Subject: RE: [nsp] OSPF not distributing 1 interface
>
>
>Hello,
>
>Try "redistribute static subnets" under "router ospf 10"
>
>Chris Davis
>Site Engineer
>www.ComputerJobs.com
>Upgrade Your Future
>
>
>
>-----Original Message-----
>From: Freeserve (E-mail) [mailto:steve@godus.freeserve.co.uk]
>Sent: Monday, May 21, 2001 12:26 PM
>To: cisco-nsp@puck.nether.net
>Subject: [nsp] OSPF not distributing 1 interface
>
>
>Hi,
>I have a strange problem with OSPF.
>
>The config is a very simple one area, one network statement. I have a /30
>joining to routers over Ethernet and basically neither of the routers is
>redistributing this connected link into OPSF?
>
>The 2 routers have other connections in the same network range and these are
>being redistributed ok to the other 10 routers on the network?
>
>If anyone has any ideas I would appreciate it.
>
>Here is the config:
>
>ROUTER 1:
>
>interface FastEthernet0/0
> description ******* HG1-PE4 ********
> ip address 10.0.16.30 255.255.255.252
> ip ospf cost 5
> duplex auto
> speed auto
> tag-switching mtu 1600
> tag-switching ip
> no cdp enable
>
>router ospf 10
> log-adjacency-changes
> network 10.0.0.0 0.255.255.255 area 0.0.0.0
>
>
>ROUTER 2:
>
>interface FastEthernet2/1
> description ****** HG1-PE5 ******
> ip address 10.0.16.29 255.255.255.252
> ip ospf cost 5
> duplex auto
> speed auto
> tag-switching mtu 1600
> tag-switching ip
>
>router ospf 10
> log-adjacency-changes
> passive-interface Serial3/0.2
> network 10.0.0.0 0.255.255.255 area 0.0.0.0
>
>Thanks in advance
>
>Steve.
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:38 EDT