RE: Scaling IPSec VPNs and Meshes ?

From: Erik Drost (drost@bunnik.ision.nl)
Date: Wed May 23 2001 - 03:50:32 EDT


Maybe you should take a look at the latest version of Cisco VPN Solution
Center, which Cisco announced yesterday:
 http://newsroom.cisco.com/dlls/prod_052101c.html

Regards,

Erik

> -----Original Message-----
> From: Kevin Gannon [mailto:kevin@gannons.net]
> Sent: Tuesday, 22 May, 2001 22:14
> To: cisco-nsp@puck.nether.net
> Subject: Scaling IPSec VPNs and Meshes ?
>
>
> We are looking at deploying a Cisco IPSec VPN between a number
> of our departments. However the problem is we do _not_ want to
> terminate the peers on a central box. We want to create a a partial
> mesh and most likely a full mesh.
>
> The problem is the crypto peers , each time we add a new site
> it means a huge pain in the ass creating all the new peers.
> Is there anyway around this ?
>
> I know MPLS would be ideal for this but we are already running
> MPLS but we are required to also have IPSec and can not
> have a central termination for the peers.
>
> Regards,
> Kevin
>
>
> *********************************IMPORTANT
> NOTICE******************************
> All e-mails for technical support must be cc'd to
> support@lancomms.ie. This
> ensures that the call is logged with the support desk and the
> case is actively
> tracked which speeds up the response you will receive. If you
> have an urgent
> problem you _must_ contact the support desk directly on 01-4093030.
> **************************************************************
> ***************************
>
>



This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:38 EDT