RE: [nsp] AS5300 <Hangging/Stuck>

From: Mohd Nazri Ismail (mnazri@mimos.my)
Date: Wed May 23 2001 - 00:07:52 EDT


Can you recommend to us, which is the best IOS that i can used it. Also
that IOS will not error/conflit with our mica modem IOS
(mica-modem-pw.2.7.2.0.bin).

Any way thank you for your help.

              .~.
              /V\ L I N U X
             // \\ > Don't fear the penguin <
            /( )\
             ^^-^^

                                                            

--Nazri---

On Tue, 22 May 2001, Aaron Leonard wrote:

>
> > Are you have the URL to download these IOS e.g
> > 12.1(0.4) 12.1(0.5)T 12.1(1)DC 12.1(1)DB
>
> > thank you.
>
> > --nazri
>
> You don't want to use those IOS versions; you want to use
> more recent ones.
>
> You can download IOS from CCO:
> http://www.cisco.com/cgi-bin/Software/Iosplanner/Planner-tool/iosplanner.cgi
>
> Aaron
>
> ---
>
> > On Fri, 18 May 2001, Denis Saveliev wrote:
>
> > >
> > > This is a well known bug - CSCdp33819
> > > We were hit by it quite hard but luckily cisco was quick to fix it. So, the
> > > standard sdvice - upgrade the ios! :-)
> > >
> > > Bug Id : CSCdp33819
> > > Headline on TTY lines process virtual-exec is running, no user dialed in
> > > Version Found 12.0(5)T01
> > > Fixed-in Version 12.1(0.4) 12.1(0.5)T 12.1(1)DC 12.1(1)DB
> > >
> > > Release Notes
> > > If you enter the show users command, you might see that
> > > the Virtual Exec process is running on the modem even when no users are
> > > connected. This situation does not affect the allocation of the modem for
> > > subsequent sessions. The next user that logs in to the modem will clear the
> > > condition. There is no workaround.
> > >
> > > Hope this helps.
> > >
> > > Denis Saveliev
> > > Network Engineer
> > > Energis Squared
> > > DDI: +44 (0) 113 207 6188
> > > Fax: +44 (0) 113 234 6065
> > > Mob: +44 (0) 7899 995 996
> > >
> > >
> > > > -----Original Message-----
> > > > From: Mohd Nazri Ismail [mailto:mnazri@mimos.my]
> > > > Sent: 18 May 2001 01:54
> > > > To: cisco-nsp@puck.nether.net
> > > > Cc: tam; Alessandro Chiolo; Nikki Mehta; Cisco-Nas (E-mail); Cisco-Nsp
> > > > (E-mail)
> > > > Subject: [nsp] AS5300 <Hangging/Stuck>
> > > >
> > > >
> > > >
> > > >
> > > > Hello Everybody, I need some help here.
> > > >
> > > > We are using Cisco AS5300,
> > > > I normally have the post dial terminal screen up (bring up
> > > > terminal after
> > > > dialing) to check the login process and found that some
> > > > modems just hang
> > > > after presenting you with the login screen. It cannot accept
> > > > input from my
> > > > keyboard as it does not echo the characters that I type. Then
> > > > it returns a
> > > > timeout message! It looks like when there are many users online.
> > > >
> > > > When we run command 'show users', it will show a lot of '
> > > > Virtual Exec',
> > > > default only 5 'Virtual Exec' BUT in my case it will appear more that
> > > > that.
> > > >
> > > > After i reboot/reload my AS5300, it will back to normal and
> > > > our users can
> > > > dial in without any problem to AS5300. This problem will
> > > > happen again in
> > > > the future.
> > > >
> > > >
> > > > Anyone from this group have faced this problem. Please help me.
> > > >
> > > > thank you a lot.
> > > >
> > > > --nazri/access
> > > >
>
>



This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:38 EDT