Re: [nsp] line vty 0 4

From: Gert Doering (gert@greenie.muc.de)
Date: Tue May 29 2001 - 10:33:28 EDT

Next message: George Robbins: "Re: [nsp] line vty 0 4"
Previous message: Gert Doering: "Re: [nsp] 7206 NPE 200"
In reply to: Damien Holloway: "[nsp] line vty 0 4"
Next in thread: Scott Whyte: "Re: [nsp] line vty 0 4"
Reply: Scott Whyte: "Re: [nsp] line vty 0 4"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

Hi,

On Tue, May 29, 2001 at 09:25:03AM -0400, Damien Holloway wrote:
> if I put
> line vty 0 8
[..]
> Has something changed or is it IOS specific?

At some point in time, you needed the "enterprise" IOS feature set to get
more vty (them being used for protocol translation and such).

Routers with modem dial-in might also have more available (V.110, X.75).

gert

-- 
USENET is *not* the non-clickable part of WWW!
                                                           //www.muc.de/~gert/
Gert Doering - Munich, Germany                             gert@greenie.muc.de
fax: +49-89-35655025                        gert.doering@physik.tu-muenchen.de

Next message: George Robbins: "Re: [nsp] line vty 0 4"
Previous message: Gert Doering: "Re: [nsp] 7206 NPE 200"
In reply to: Damien Holloway: "[nsp] line vty 0 4"
Next in thread: Scott Whyte: "Re: [nsp] line vty 0 4"
Reply: Scott Whyte: "Re: [nsp] line vty 0 4"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:39 EDT