RE: [nsp] line vty 0 4

From: Ryan Roylance (ryan@accelica.com)
Date: Tue May 29 2001 - 14:19:37 EDT

Next message: Gert Doering: "Re: [nsp] 7206 NPE 200"
Previous message: Deepak Jain: "RE: [nsp] 7206 NPE 200"
In reply to: Scott Whyte: "Re: [nsp] line vty 0 4"
Next in thread: George Robbins: "Re: [nsp] line vty 0 4"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

We ran into this same issue the other day, after discussing it with TAC it
appears you have to have enterprise IOS in order to support more then 5 vty
lines.

ryan

-----Original Message-----
From: Scott Whyte [mailto:swhyte@cisco.com]
Sent: Tuesday, May 29, 2001 10:22
To: Gert Doering
Cc: Damien Holloway; cisco-nsp@puck.nether.net
Subject: Re: [nsp] line vty 0 4

On Tue, 29 May 2001, Gert Doering wrote:

> Hi,
>
> On Tue, May 29, 2001 at 09:25:03AM -0400, Damien Holloway wrote:
> > if I put
> > line vty 0 8
> [..]
> > Has something changed or is it IOS specific?
>
> At some point in time, you needed the "enterprise" IOS feature set to get
> more vty (them being used for protocol translation and such).

Yes and no. Protocol translation is the specific feature that needs to be
built into the IOS image to support more vtys. A quick check with the
feature navigator on CCO shows the following feature sets support Protocol
Translation in 12.2(1) and later:

                       DESKTOP PLUS
                       DESKTOP VOICE PLUS
                       ENTERPRISE IPSEC 3DES
                       ENTERPRISE IPSEC 56
                       ENTERPRISE MCM
                       ENTERPRISE PLUS IPSEC 3DES
                       ENTERPRISE PLUS IPSEC 56
                       ENTERPRISE PLUS VOIP/VOATM IPSEC 3DES
                       ENTERPRISE PLUS VOIP/VOATM IPSEC 56
                       ENTERPRISE PLUS VOIP/VOATM
                       ENTERPRISE PLUS/H323 MCM
                       ENTERPRISE PLUS
                       ENTERPRISE VOICE PLUS
                       ENTERPRISE/ATM PLUS IPSEC 3DES
                       ENTERPRISE/FW PLUS IPSEC 56
                       ENTERPRISE/FW/IDS IPSEC 3DES
                       ENTERPRISE/FW/IDS IPSEC 56
                       ENTERPRISE/FW/IDS PLUS IPSEC 3DES
                       ENTERPRISE/FW/IDS PLUS IPSEC 56
                       ENTERPRISE/FW/IDS
                       ENTERPRISE/SNASW IPSEC 3DES
                       ENTERPRISE/SNASW IPSEC 56
                       ENTERPRISE/SNASW PLUS IPSEC 3DES
                       ENTERPRISE/SNASW PLUS IPSEC 56
                       ENTERPRISE/SNASW PLUS
                       ENTERPRISE/SNASW
                       ENTERPRISE
                       IP PLUS IPSEC 3DES
                       IP PLUS IPSEC 56
                       IP PLUS
                       IP/FW PLUS IPSEC 56
                       IP/FW PLUS
                       IP/FW/IDS PLUS IPSEC 3DES
                       IP/FW/IDS PLUS IPSEC 56
                       IP/IPX PLUS
                       IP/IPX/AT/DEC PLUS
                       IP/IPX/AT/DEC/FW/IDS PLUS
                       IP/IPX/FW PLUS IPSEC 56
                       IP/VOICE PLUS
                       REMOTE ACCESS SERVER
                       SERVICE PROVIDER IPSEC 56
                       SERVICE PROVIDER WITH PT/TARP
                       TELCO FEATURE SET
                       TELCO PLUS FEATURE SET IPSEC 3DES
                       TELCO PLUS FEATURE SET

>
> Routers with modem dial-in might also have more available (V.110, X.75).
>
> gert
>
>
>

Next message: Gert Doering: "Re: [nsp] 7206 NPE 200"
Previous message: Deepak Jain: "RE: [nsp] 7206 NPE 200"
In reply to: Scott Whyte: "Re: [nsp] line vty 0 4"
Next in thread: George Robbins: "Re: [nsp] line vty 0 4"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:39 EDT