Re: [nsp] 6509s, BGP, dot1q, Static Routes limit, and such things

From: lf@elemental.net
Date: Fri Jun 01 2001 - 04:53:43 EDT

Next message: Miguel A.L. Paraz: "[nsp] client-side SSH to use for Cisco?"
Previous message: Barry Raveendran Greene: "RE: sho ip cache flow via SNMP?"
In reply to: Rubens Kuhl Jr.: "RE: [nsp] 6509s, BGP, dot1q, Static Routes limit, and such things"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

Quoting Rubens Kuhl Jr. (rkuhljr@uol.com.br):

> BlackDiamond. Using switch fabric and only fabric-enabled modules (only
> gigabit modules available) provides lots of bandwidth to play with, but also
> requires Sup2.

        It seems there's a fabric enabled card for FastEthernet and Ethernet
        now: WS-X6548-RJ-45. It is listed as "48-port 10/100BASE-TX Ethernet
        module with single 8-Gbps connection to the Switch Fabric Module" in
        http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/relnotes/
        78_11235.htm#xtocid293074. I couldn't find much more info on CCO
        though...

Cheers,
Lars.

-- 
Lars Fenneberg, lf@elemental.net (private), lf@mcs-cityline.net (work)

Next message: Miguel A.L. Paraz: "[nsp] client-side SSH to use for Cisco?"
Previous message: Barry Raveendran Greene: "RE: sho ip cache flow via SNMP?"
In reply to: Rubens Kuhl Jr.: "RE: [nsp] 6509s, BGP, dot1q, Static Routes limit, and such things"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:39 EDT