Mon, Jun 04, 2001 at 05:44:47PM -0400, Charles Sprickman:
> Ooops, I meant memory for the 150...
yes, its the same as the 200. 72 pin, parity, tin toe 60ns or faster.
memorytime 452-8577 bill@memorytime.com (bill matson)
this guy can get you almost all memory for cisco bits.
> C
>
> On Mon, 4 Jun 2001, Jared Mauch wrote:
>
> > That's what I did. NPE-225 works perfect in the non-vxr chassis.
> >
> > - jared
> >
> > On Mon, Jun 04, 2001 at 05:41:32PM -0400, Charles Sprickman wrote:
> > > While we're at it, how about low-cost replacements for the NPE-150?
> > >
> > > Charles
> > >
> > > On Mon, 4 Jun 2001, Daniel Drown wrote:
> > >
> > > > On Mon, Jun 04, 2001 at 04:16:05PM -0400, Jared Mauch wrote:
> > > > > Doesn't the NPE-200 take 72-pin simms?
> > > > >
> > > > > If it takes DIMMS, I would give it a try.
> > > >
> > > > The NPE-200 I just took apart here takes 72-pin FP Parity simms.
> > > >
> > > > --
> > > > Daniel Drown
> > > >
> >
> > --
> > Jared Mauch | pgp key available via finger from jared@puck.nether.net
> > clue++; | http://puck.nether.net/~jared/ My statements are only mine.
> >
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:40 EDT