Have you checked to make sure vlan 60 still exists?
-- steve
-----Original Message-----
From: Christopher Neill [mailto:noise@cow.org]
Sent: Monday, June 04, 2001 7:37 PM
To: cisco-nsp@puck.nether.net
Subject: [nsp] "inactive" ports? (WS6k, SUP1AE+MSFC/2xGBIC)
anyone ever get this jazz?
switch02.sjc (enable) sh port stat 1
Port Name Status Vlan Duplex Speed Type
----- ------------------ ---------- ---------- ------ ----- ------------
1/1 inactive 60 full 1000 1000BaseSX
1/2 inactive 60 full 1000 1000BaseSX
switch02.sjc (enable) set port dis 1/1-2
This command may disconnect your telnet session.
Do you want to continue (y/n) [n]?y
Ports 1/1-2 disabled.
switch02.sjc (enable) set port en 1/1
Failed to enable port 1/1.
Port may be faulty.
switch02.sjc (enable) set port en 1/2
Failed to enable port 1/2.
Port may be faulty.
-- $Id: .sig,v 1.43 2001/04/07 18:00:44 noise Exp $ "It's a kind of love affair. If you spend half an hour making scrambled eggs in the morning for someone, then you really love them." -Chef Boulud_________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:40 EDT