I had this problem once, but it was'nt on an MSFC card. A reset of the card solved the problem
Jeremie
----- Original Message -----
From: "Stephen Gill" <gillsr@yahoo.com>
To: "'Christopher Neill'" <noise@cow.org>; <cisco-nsp@puck.nether.net>
Sent: Tuesday, June 05, 2001 2:59 AM
Subject: RE: [nsp] "inactive" ports? (WS6k, SUP1AE+MSFC/2xGBIC)
> Have you checked to make sure vlan 60 still exists?
>
> -- steve
>
> -----Original Message-----
> From: Christopher Neill [mailto:noise@cow.org]
> Sent: Monday, June 04, 2001 7:37 PM
> To: cisco-nsp@puck.nether.net
> Subject: [nsp] "inactive" ports? (WS6k, SUP1AE+MSFC/2xGBIC)
>
>
> anyone ever get this jazz?
>
> switch02.sjc (enable) sh port stat 1
> Port Name Status Vlan Duplex Speed Type
> ----- ------------------ ---------- ---------- ------ ----- ------------
> 1/1 inactive 60 full 1000 1000BaseSX
> 1/2 inactive 60 full 1000 1000BaseSX
> switch02.sjc (enable) set port dis 1/1-2
> This command may disconnect your telnet session.
> Do you want to continue (y/n) [n]?y
> Ports 1/1-2 disabled.
> switch02.sjc (enable) set port en 1/1
> Failed to enable port 1/1.
> Port may be faulty.
> switch02.sjc (enable) set port en 1/2
> Failed to enable port 1/2.
> Port may be faulty.
>
> --
> $Id: .sig,v 1.43 2001/04/07 18:00:44 noise Exp $
> "It's a kind of love affair. If you spend half an hour making scrambled eggs
> in the morning for someone, then you really love them." -Chef Boulud
>
>
> _________________________________________________________
> Do You Yahoo!?
> Get your free @yahoo.com address at http://mail.yahoo.com
>
>
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:40 EDT