Re: [nsp] Where to use RPF?

From: Charles Sprickman (spork@inch.com)
Date: Fri Jun 08 2001 - 00:07:22 EDT


Same goes for a BVI interface? Any particular rev to run?

Thanks,

Charles

On Thu, 7 Jun 2001, Siva Valliappan wrote:

> virtual-template. make sure you are running a version of code where
> PPPoA is cef switched (at least 12.0(7)T or later).
>
> cheers
> .siva
>
>
> On Thu, 7 Jun 2001, Dan Hollis wrote:
>
> > If you are using PPPOA, what level do you implement the
> > 'ip verify unicast reverse-path' command?
> >
> > The ATM0/0 interface, the ATM0/0.subint interface, or the
> > virtual-template interface?
> >
> > -Dan
> >
>



This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:40 EDT