BVIs are currently not CEF switched, a featurette is going into IOS
to CEF switch BVI interfaces, and it will shortly (next few weeks)
be CEF switched. RBE has been CEF switched since 12.1(5)T.
cheers
.siva
>
> Same goes for a BVI interface? Any particular rev to run?
>
> Thanks,
>
> Charles
>
> On Thu, 7 Jun 2001, Siva Valliappan wrote:
>
> > virtual-template. make sure you are running a version of code where
> > PPPoA is cef switched (at least 12.0(7)T or later).
> >
> > cheers
> > .siva
> >
> >
> > On Thu, 7 Jun 2001, Dan Hollis wrote:
> >
> > > If you are using PPPOA, what level do you implement the
> > > 'ip verify unicast reverse-path' command?
> > >
> > > The ATM0/0 interface, the ATM0/0.subint interface, or the
> > > virtual-template interface?
> > >
> > > -Dan
> > >
> >
>
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:40 EDT