As I understand your message you speaking about CPU problem ? with 34Mbit
traffic. Or you want to implement IDS (IOS FW) to the system running 34Mbit
ceiling....
Yo, Wich NPE module you have?, Wich IOS? BGP, QoS implemeted?
Try :sh int atm 2/0 stat
ATM2/0
Switching path Pkts In Chars In Pkts Out Chars Out
Processor 17594328 2599274205 14482240 1460471039
Route cache 435507328 2924440973 421488579 1957961882
Total 453101656 1228747882 435970819 3418432921
What is the ratio between proc/fast switched packets?
Do you running CEF?
Alex
-----Original Message-----
From: Kevin Gannon [mailto:kevin@gannons.net]
Sent: Wednesday, June 13, 2001 6:22 AM
To: cisco-nsp@puck.nether.net
Subject: [nsp] IOS IDS at 34M ?
We are looking at using the IOS on one of our ATM PVC's which is
currently 34M running at 100%. Its a 7206 (not VXR) with 128Mb.
I am looking to hear anyones experience with these levels of traffic.
I get the feeling its nuts.
Regards,
Kevin
*********************************IMPORTANT
NOTICE******************************
All e-mails for technical support must be cc'd to support@lancomms.ie. This
ensures that the call is logged with the support desk and the case is
actively
tracked which speeds up the response you will receive. If you have an urgent
problem you _must_ contact the support desk directly on 01-4093030.
****************************************************************************
*************
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:41 EDT