hi,
does anyone have any pointers on the following error message:
2001 Jun 14 14:50:50 PDT -07:00 %SYS-3-SYS_LCPERR3:Module 4: Coil Pb Tx Underflow Error - Port #13:
2001 Jun 14 14:50:50 PDT -07:00 %SYS-3-SYS_LCPERR3:Module 4: Coil Pb Tx Underflow Error - Port #14:
2001 Jun 14 14:50:50 PDT -07:00 %SYS-3-SYS_LCPERR3:Module 4: Coil Pb Tx Underflow Error - Port #15:
2001 Jun 14 14:50:50 PDT -07:00 %SYS-3-SYS_LCPERR3:Module 4: Coil Pb Tx Underflow Error - Port #23:
this is happening on a catalyst 6506 w/sup2, pfc2, msfc2, running ver 6.1(2)
on the sup2. Module 4 is a 48-port 10/100 TX blade; there are identical
blades in slots 2, 3, and 5 that are not showing this problem. the error
appears to be affecting ports 13-23 on the blade, when it happens it happens
to several ports at the same time, but not always the same set of ports.
i can't find any reference to this error message on cisco's web pages.
thanks,
ken
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:42 EDT