RE: [nsp] Line protocol down!!

• Next message: Eric Osborne: "Re: path protection in Cisco routers"
• Previous message: Kevin Gannon: "[nsp] Bulk config changes and experiences ?"
• Maybe in reply to: Konstantinos Bilalis: "[nsp] Line protocol down!!"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

----- Original Message -----
From: Konstantinos Bilalis
To: cisco-nsp@puck.nether.net
Sent: Thursday, June 21, 2001 1:55 AM
Subject: [nsp] Line protocol down!!
 
> Although the router's interface is "Serial1/2 is up, line
> protocol is down",
>
> I have "30 second input rate 718000 bits/sec, 154
> packets/sec & 30 second output rate 0 bits/sec, 0 packets/sec"!

I've had exactly the same problem with an serial interface
serving an E1 line. The problem was a faulty G.704/X.21 converter.

Stefan Gasteiger

--
InfraServ Gendorf		
Tel.: +49 8679 7 5599	
Fax: +49 8679 7 39 5599
Mobile: +49 172 8649205

• Next message: Eric Osborne: "Re: path protection in Cisco routers"
• Previous message: Kevin Gannon: "[nsp] Bulk config changes and experiences ?"
• Maybe in reply to: Konstantinos Bilalis: "[nsp] Line protocol down!!"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:42 EDT