> IIRC, Cisco does not support ISL or dot1q on 10Mbit ethernet, so step one
> would be to get a new router ...
According to the feature navigator, there is no .1q or isl support at all
for on a 2500. However, 10mbit .1q does exist on other platforms:
(NM-2W1E on 3662):
Ethernet5/0.1 is up, line protocol is down
Hardware is AmdP2, address is 00b0.6452.1a71 (bia 00b0.6452.1a71)
MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec,
reliability 249/255, txload 1/255, rxload 1/255
Encapsulation 802.1Q Virtual LAN, Vlan ID 16.
ARP type: ARPA, ARP Timeout 04:00:00
Ethernet5/0.2 is up, line protocol is down
Hardware is AmdP2, address is 00b0.6452.1a71 (bia 00b0.6452.1a71)
MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec,
reliability 223/255, txload 1/255, rxload 1/255
Encapsulation 802.1Q Virtual LAN, Vlan ID 17.
ARP type: ARPA, ARP Timeout 04:00:00
..kg..
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:43 EDT