Re: [nsp] 7500 Backplane Architecture!

From: lf@elemental.net
Date: Fri Jul 13 2001 - 16:30:52 EDT

Next message: Thomas Kernen: "Re: serial port operation above 2048Kbps for sat circuit"
Previous message: Bill Woodcock: "Re: [nsp] Frame Relay Congestion management"
In reply to: Angelo De Guzman: "[nsp] 7500 Backplane Architecture!"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

Quoting Angelo De Guzman (a.deguzman@wesolv.com.ph):

> Does anyone have a good documentation on the Hardware Architecture of
> the 7500 routers? I want to learn more on the PA combinations and where to
> put it on the right slot in the 7500. I also want to learn more about the
> Cy, Cx and other buses.

Try this document:

Cisco 7200 and 7500 Configuration Guidelines
http://www.cisco.com/networkers/presentations/general/1040_038.ppt

Cheers,
Lars.

-- 
Lars Fenneberg, lf@elemental.net (private), lf@mcs-cityline.net (work)

Next message: Thomas Kernen: "Re: serial port operation above 2048Kbps for sat circuit"
Previous message: Bill Woodcock: "Re: [nsp] Frame Relay Congestion management"
In reply to: Angelo De Guzman: "[nsp] 7500 Backplane Architecture!"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:44 EDT