Hi Alferdo,
I'm quite interested on trying this on a 2620.. but AFAIK the NM-4T
isn't supported. Are you saying that the WIC-1t or more likly the WIC-2T
can do the job?
Since this a a full duplex feed I'm not sure it can.
Thomas
----- Original Message -----
From: "Alfredo Sola" <alfredo@intelideas.com>
To: "Thomas Kernen" <tkernen@deckpoint.ch>
Cc: <cisco-nsp@puck.nether.net>
Sent: Friday, July 13, 2001 12:05 PM
Subject: Re: serial port operation above 2048Kbps for sat circuit
Hi Thomas,
> will deliver a 3Mbps full duplex circuit onto one V.35 port, AFAIK
only
> a few Cisco serial interfaces support speeds above the 2048Kbps limit
> (PA-4T do this I believe). Does anyone have some experience with this
> type of setup they could share.
Beginning with the 2600, the serials will support up to 8 Mbps.
Depending on the platform, you will need to leave unused some ports on
the same PA/NM. See for instance
http://www.cisco.com/warp/public/cc/pd/rt/3600/prodlit/seral_ds.htm for
the NM stuff,
http://www.cisco.com/univercd/cc/td/doc/product/cable/cab_rout/cfig_nts/
4159m4tp/4159over.htm
for the PA stuff.
-- Alfredo Sola Director técnico
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:44 EDT