Hi,
On Fri, Jul 13, 2001 at 08:11:34AM -0400, Thomas Kernen wrote:
> I'll be connecting a remote POP via a satellite circuit to our network
> within a few weeks and I came across the following. The sat provider
> will deliver a 3Mbps full duplex circuit onto one V.35 port, AFAIK only
> a few Cisco serial interfaces support speeds above the 2048Kbps limit
> (PA-4T do this I believe). Does anyone have some experience with this
> type of setup they could share.
As far as I know, all multi-port serial interfaces can do this - that
means usually for a n-port interface you have n x 2Mbit/s available. If
you use only two ports on a 4-port interface, each can go to 4 Mbit, if
you use only one, you gan go up to 8 Mbit/s.
(For a FSIP, it's only n x 1.5 Mbit/s., though :) ).
gert
--
USENET is *not* the non-clickable part of WWW!
//www.muc.de/~gert/
Gert Doering - Munich, Germany gert@greenie.muc.de
fax: +49-89-35655025 gert.doering@physik.tu-muenchen.de
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:44 EDT