hello Roy,
type5 from the backbone are not translated into type7 on an NSSA ABR ...
EXCEPT if the ABR for the NSSA is also an ASBR, e.g. it creates some type5
LSAs
in this case, when you use redistribute command, the ASBR/ABR creates both a
type5 that is propagated into area 0 and non stub areas and a type7 LSA that
goes into the NSSA it is connected to.
Hope this will help,
regards,
/stephane
----------------------------------------------------------------------------
-----------
Stephane BENFREDJ Global Knowledge
Network Consultant Immeuble Odyssée - Bât. D
CCIE #4725 2-12, Chemin des Femmes
91886 Massy Cedex
France
email: benfredjs@globalknowledge.net
Tel: +33(0) 1 73 23 89 00
http://www.globalknowledge.fr
Fax: +33(0) 1 64 53 89 10
----------------------------------------------------------------------------
-----------
-----Message d'origine-----
De: Roy Reyes [mailto:rreyes365@zdnetonebox.com]
Envoyé: lundi 30 juillet 2001 08:42
À: cisco-nsp@puck.nether.net
Objet: [nsp] ospf nssa
hello guys,
I have an nssa area which is connected to the area0(backbone) i noticed
that when i used "redistribute command" if i want to inject type 5 LSA
to be propagated from area 0 to nssa area to be converted to type 7 LSA
i can't see it on my routing table BUT i can see the type 7 LSA from
the OSPF database. Why is this happen?
Is there a way where i can inject an external routes (type 5 LSA)
from area 0 going to the nssa area?
thanks,
rreyes
___________________________________________________________________
To get your own FREE ZDNet Onebox - FREE voicemail, email, and fax,
all in one place - sign up today at http://www.zdnetonebox.com
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:47 EDT