Deat Frieds
Then memory shown in my router by sh ver and show mem
are as follows.
===========================
WNPL36>>sh ver
WNPL3640>> uptime is 3 days, 19 hours, 10 minutes
System returned to ROM by power-on
System image file is "flash:c3640-i-mz.120-5.T1"
cisco 3640 (R4700) processor (revision 0x00) with 24576K/8192K bytes of
memory.
============================
and sh mem as
=============================
WNPL36>>sh mem
Head Total(b) Used(b) Free(b)
Lowest(b) Largest(b)
Processor 60C027E0 12572704 3245224 9327480 9167752 9239984
I/O 1800000 8388608 1890488 6498120 6477964
6498076
===================================
from sh mem total RAM including processor and I/O get nearly 20MB while
output of the command shows 32MB total RAM in my router.
Can anybody tell why this diffrence came in router.
Where that other RAM get utilize?
Thanks in advance
Tejal
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:49 EDT