hello edward,
CBWFQ is now supported with FRTS (IOS release 12.1(2)T and later)
Hope this will help
Regards,
stephane
-----Original Message-----
From: Edward S. Desouza
To: cisco-nsp@puck.nether.net
Sent: 16/08/01 07:15
Subject: [nsp] CBWFQ On frame relay Interfaces
Hi,
I have a frame Relay PVC of 16 k CIR. My access
links at both end are E1. I need to configure class
based weighted fair queueing on this interface.
Class Based Weighted fair queuing allows a
percentage of bandwdith to be configured per traffic
class. However, Since my access link is much higher
than the PVC, My router will keep on pumping data into
the FR network since the access speed is much higher
than the PVC.
A solution to the above would be to confiugre FRTS.
However, FRTS does not support CBWFQ !
Have any of you guys run into a similar problem
where you need to do a class based queuing on a frame
relay PVC ? I dont want to use multiple PVC's for
multiple classes of traffic.
__________________________________________________
Do You Yahoo!?
Make international calls for as low as $.04/minute with Yahoo! Messenger
http://phonecard.yahoo.com/
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:49 EDT