RE: [nsp] CRC input errors

• Next message: Michuki Mwangi: "[nsp] CIR - Traffic Shaping on Rate Limit"
• Previous message: Sonya Gilly: "[nsp] Multi VLAN in 2924XL"
• In reply to: Juan C. Verde: "Re: [nsp] CRC input errors"
• Next in thread: Michuki Mwangi: "[nsp] CIR - Traffic Shaping on Rate Limit"
• Reply: Michuki Mwangi: "[nsp] CIR - Traffic Shaping on Rate Limit"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

Hi Juan,

I have disabled keepalives in that interface and now there aren't new
errors.

Thank you very much.
Sonya Gilly

-----Mensaje original-----
De: Juan C. Verde [mailto:juanc.verde@inycom.es]
Enviado el: viernes, 17 de agosto de 2001 9:10
Para: Sonya Gilly
CC: Cisco-Nsp
Asunto: Re: [nsp] CRC input errors

Hi Sonya

> Sonya Gilly wrote:
>
> Hi,
>
> I have configured ISL between a 2924XL switch and a 3640 router (with
> FastEthernet interfaces). Since the begining I have seen CRC input
> errors in the switch's interface with ISL although the communication
> with the two VLANs is right. There are no errors in the 3640.

See if the rate of CRC errors is about 1 each 10 seconds; if so, try to
disable keepalives in the router's native FastEthernet interface.

Cheers
Juan C. Verde

• Next message: Michuki Mwangi: "[nsp] CIR - Traffic Shaping on Rate Limit"
• Previous message: Sonya Gilly: "[nsp] Multi VLAN in 2924XL"
• In reply to: Juan C. Verde: "Re: [nsp] CRC input errors"
• Next in thread: Michuki Mwangi: "[nsp] CIR - Traffic Shaping on Rate Limit"
• Reply: Michuki Mwangi: "[nsp] CIR - Traffic Shaping on Rate Limit"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:49 EDT