Re: [nsp] CRC input errors

From: Juan C. Verde (juanc.verde@inycom.es)
Date: Fri Aug 17 2001 - 03:12:23 EDT

Next message: Mark Pace Balzan: "Re: [nsp] CRC input errors"
Previous message: Ron Fuller: "[nsp] CRC errors on trunks"
In reply to: Sonya Gilly: "[nsp] CRC input errors"
Next in thread: Sonya Gilly: "RE: [nsp] CRC input errors"
Reply: Sonya Gilly: "RE: [nsp] CRC input errors"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

Hi Sonya

> Sonya Gilly wrote:
>
> Hi,
>
> I have configured ISL between a 2924XL switch and a 3640 router (with
> FastEthernet interfaces). Since the begining I have seen CRC input
> errors in the switch's interface with ISL although the communication
> with the two VLANs is right. There are no errors in the 3640.

See if the rate of CRC errors is about 1 each 10 seconds; if so, try to
disable keepalives in the router's native FastEthernet interface.

Cheers
Juan C. Verde

Next message: Mark Pace Balzan: "Re: [nsp] CRC input errors"
Previous message: Ron Fuller: "[nsp] CRC errors on trunks"
In reply to: Sonya Gilly: "[nsp] CRC input errors"
Next in thread: Sonya Gilly: "RE: [nsp] CRC input errors"
Reply: Sonya Gilly: "RE: [nsp] CRC input errors"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:49 EDT