Re: [nsp] CRC input errors

From: Mark Pace Balzan (mpb@melitacable.com)
Date: Fri Aug 17 2001 - 02:45:58 EDT

Next message: George Robbins: "Re: [nsp] CRC errors on trunks"
Previous message: Juan C. Verde: "Re: [nsp] CRC input errors"
In reply to: Sonya Gilly: "[nsp] CRC input errors"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

most likely speed or duplex mismatches on the interfaces

Mark
  ----- Original Message -----
  From: Sonya Gilly
  To: Cisco-Nsp
  Sent: Friday, August 17, 2001 8:39 AM
  Subject: [nsp] CRC input errors

  Hi,

  I have configured ISL between a 2924XL switch and a 3640 router (with FastEthernet interfaces). Since the begining I have seen CRC input errors in the switch's interface with ISL although the communication with the two VLANs is right. There are no errors in the 3640.

  The test has been made with two software versions: 12.0(5.2)XU and 12.0(5.4)WC.

  Can anyone tell me what happens with this?

  Sonya Gilly

Next message: George Robbins: "Re: [nsp] CRC errors on trunks"
Previous message: Juan C. Verde: "Re: [nsp] CRC input errors"
In reply to: Sonya Gilly: "[nsp] CRC input errors"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:49 EDT