Hi,
I have a question regarding the OSPF database output from a "show ip ospf
database". In my test environment, I have a router with equally costed
routes to a destination and these can be seen from issuing a "show ip
route". An extended PING will also demonstrate that load-balancing is
occuring.
When I look at the OSPF database "show ip ospf database", I do not see both
references to the destination, I only see one reference. Should I not see
both references to the destination??
I hope this is not too basic a question.
regards, Ian
email: ijt@evasam.com
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:50 EDT