Hello,
I have a problem with a L2TP and GRE based "vpn". The network itself is
running fine. I get the connections between the offices (GRE) and the
remotes users (L2TP) and the bandwidth is fine, when I transmit files
with FTP. But if I want to use the file sharing from Windows 98/NT/2000
to copy files between the locations I get only the half of the bandwidth
(about 3,5 to 5 KByte/sec.), which I get with FTP (6,5 to 7 KByte/sec).
Did some know if this is a windows specific problem? Do I need some
special tunnel command on the cisco 1600 or must I change some thing on
the windows based computers?
Did some one know a doc, some where in the web, how to run windows
networks over GRE tunnels?
interface Tunnel3
ip unnumbered Loopback0
ip helper-address 10.120.100.12
bandwidth 128
tunnel source Loopback0
tunnel destination 195.143.111.111
regards,
Atto Lorenz.
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:51 EDT