At 11:01 16/10/01 +0200, Atto Lorenz wrote:
May or may not be of help:
http://www.cisco.com/warp/public/105/38.shtml
http://www.cisco.com/warp/public/105/56.html
-Hank
>Hello,
>
>I have a problem with a L2TP and GRE based "vpn". The network itself is
>running fine. I get the connections between the offices (GRE) and the
>remotes users (L2TP) and the bandwidth is fine, when I transmit files with
>FTP. But if I want to use the file sharing from Windows 98/NT/2000 to copy
>files between the locations I get only the half of the bandwidth (about
>3,5 to 5 KByte/sec.), which I get with FTP (6,5 to 7 KByte/sec).
>
>Did some know if this is a windows specific problem? Do I need some
>special tunnel command on the cisco 1600 or must I change some thing on
>the windows based computers?
>
>Did some one know a doc, some where in the web, how to run windows
>networks over GRE tunnels?
>
>interface Tunnel3
> ip unnumbered Loopback0
> ip helper-address 10.120.100.12
> bandwidth 128
> tunnel source Loopback0
> tunnel destination 195.143.111.111
>
>regards,
>Atto Lorenz.
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:51 EDT