[nsp] 2924XL-M + 155meg ATM module VCI/VPI numbers

From: Chris Roberts (croberts@bongle.co.uk)
Date: Wed Oct 17 2001 - 10:07:09 EDT

Next message: Jonas Stenling: "Re: [nsp] opinions wanted: how is Juniper better than Cisco"
Previous message: francisv@dagupan.com: "[nsp] Cisco express forwarding"
Next in thread: Chris Roberts: "[nsp] 2924XL-M + 155meg ATM module VCI/VPI numbers"
Maybe reply: Chris Roberts: "[nsp] 2924XL-M + 155meg ATM module VCI/VPI numbers"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

I have a 2924XL with an ATM 155 module in it.
It will only let me number VPIs for PVCs as 0, and VCI's
as 1-1023. This is insufficient for my purposes - I need more
space available to me than 1023 PVCs, and ideally I would like
to use more VPI's than 0.

Is there any way (different software feature set, etc?) I can
access more PVCs/VPIs/VCIs than this on this switch?

Cheers,

-- 
|=========-----             -------=======|
|  Chris Roberts (croberts@bongle.co.uk)  |
|=======-------             -----=========|

Next message: Jonas Stenling: "Re: [nsp] opinions wanted: how is Juniper better than Cisco"
Previous message: francisv@dagupan.com: "[nsp] Cisco express forwarding"
Next in thread: Chris Roberts: "[nsp] 2924XL-M + 155meg ATM module VCI/VPI numbers"
Maybe reply: Chris Roberts: "[nsp] 2924XL-M + 155meg ATM module VCI/VPI numbers"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:51 EDT