---------------------------------------
Basil (Vasily) Dolmatov CCIE #5347
Demos-Internet Ltd. http://www.demos.su
> -----Original Message-----
> From: Tim Booth [mailto:trbooth@chartermi.net]
> Sent: Wednesday, October 17, 2001 10:41 PM
> To: cisco-nsp@puck.nether.net
> Subject: [nsp] Loading Software on a Switch
>
>
> Forwarded from someone who needs help...
>
> Model WS-C1900
> When I attempt to load the Enterprise v.9 IOS on the 1924
> switch I receive
> an
> error that states the transfer was canceled by remote host. The switch is
> model WS-C1900. I connect to the switch via a 9 pin null modem
> cable to the
> console port while hold in the mode button. I select U to upgrade the f/w
> via Xmodem. Yes, to proceed with download. I pick 9600 as the upgrade
> speed(as Hyper Terminal is configed 9600, 8, none,1). Then it states the
> flash erase completed. It shows dollars signs that it is ready for the
> image. I send it via Hyper Terminal at 9600 and I pick the bin file and
> Xmodem. After one frame is sent I receive Transfer canceled by
> remote host.
> I have done this on other 1924s, however their model number was
> WS-C1924C-A
> and they had a RJ45 console port instead of a 9 pin console port as the
> switch I'm having problems with has. Am I using the wrong
> cable(I have also
> tried the rollover cable with an adapter that worked on the other
> 1924s with
> a rj45 port and a null modem cable)? Is this model not upgradable...any
> ideas??
It is not upgradeable to this version.
Highest version you can download there is 5.x
http://www.cisco.com/univercd/cc/td/doc/product/lan/28201900/index.htm
RTFM ;)
Ideas? Throw it away and buy new one... ;)
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:51 EDT