Micky,
All GSR chassis support the 3 port GE. The message you saw on the LC LED
indicates that the IOS has been downloaded from the GRP to the LC and is
running in the DRAM, however the LC itself is not enabled yet and not ready
for use.
Look at the outputs of the following command:
sh diag <slot#>
sh gsr slot <slot#>
sh controller fia, look for crc16 errors
Have you tried in a different slot?
Alex Yeung
-----Original Message-----
From: micky [mailto:micky@apol.com.tw]
Sent: Friday, October 26, 2001 3:24 AM
To: cisco-nsp@puck.nether.net
Subject: [nsp] Cisco GSR12012 support 3port GE line card ?
Hi Mr.nsp
My GSR12012 is running IOS ver 12.0.15s1
When I finished inserting the line card,I found card was detected by
IOS
But the front panel led showed "up" ,not "run"
It's very strange,this caused GE port to be down
Anyone about this condition ?
Thanks
Have a nice weekend
Micky
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:52 EDT