Re: [nsp] Cisco GSR12012 support 3port GE line card ?

From: micky (micky@apol.com.tw)
Date: Sun Oct 28 2001 - 18:54:16 EST

Hi Alex Yeung

    Which os are you running ?
    Somebody told me about ios12.0.15s2 at least if want to use 3 port GE linecard on GSR12012
    

    Thanks
                 Micky
  ----- Original Message -----
  From: Alex Yeung
  To: micky ; cisco-nsp@puck.nether.net
  Sent: Saturday, October 27, 2001 2:25 AM
  Subject: RE: [nsp] Cisco GSR12012 support 3port GE line card ?

  Micky,

  All GSR chassis support the 3 port GE. The message you saw on the LC LED indicates that the IOS has been downloaded from the GRP to the LC and is running in the DRAM, however the LC itself is not enabled yet and not ready for use.

  Look at the outputs of the following command:
  sh diag <slot#>
  sh gsr slot <slot#>
  sh controller fia, look for crc16 errors

  Have you tried in a different slot?

  Alex Yeung
    -----Original Message-----
    From: micky [mailto:micky@apol.com.tw]
    Sent: Friday, October 26, 2001 3:24 AM
    To: cisco-nsp@puck.nether.net
    Subject: [nsp] Cisco GSR12012 support 3port GE line card ?

    Hi Mr.nsp

       My GSR12012 is running IOS ver 12.0.15s1
       When I finished inserting the line card,I found card was detected by IOS
       But the front panel led showed "up" ,not "run"
       It's very strange,this caused GE port to be down

       Anyone about this condition ?

       Thanks
       Have a nice weekend
                 Micky

        

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:21 EDT