Hi Jon
It's strange
I have used the version on GSR 12016 for a long time,that's fine,no
any problem
What's difference between 12012 and 12016 ?
Thanks
Regards,
Micky
----- Original Message -----
From: "Desmarais, Jonathan" <JDesmarais@colt-telecom.com>
To: "'micky'" <micky@apol.com.tw>
Sent: Friday, October 26, 2001 9:33 PM
Subject: RE: [nsp] Cisco GSR12012 support 3port GE line card ?
> You need 12.015S2 at least.
>
> I have the same issue, try using 12.016S(thelatest) it works well.
>
> Cheers
> Jon
>
> -----Original Message-----
> From: micky [mailto:micky@apol.com.tw]
> Sent: 26 October 2001 11:24
> To: cisco-nsp@puck.nether.net
> Subject: [nsp] Cisco GSR12012 support 3port GE line card ?
>
>
> Hi Mr.nsp
>
> My GSR12012 is running IOS ver 12.0.15s1
> When I finished inserting the line card,I found card was detected by
IOS
> But the front panel led showed "up" ,not "run"
> It's very strange,this caused GE port to be down
>
> Anyone about this condition ?
>
> Thanks
> Have a nice weekend
> Micky
>
>
>
>
>
>
> **********************************************************************
> COLT Telecommunications
> Registered in England No. 2452736
> Registered Office: Bishopsgate Court, 4 Norton Folgate, London E1 6DQ
> Tel. 020 7390 3900
>
> This message is subject to and does not create or vary any contractual
> relationship between COLT Telecommunications, its subsidiaries or
> affiliates ("COLT") and you. Internet communications are not secure
> and therefore COLT does not accept legal responsibility for the
> contents of this message. Any view or opinions expressed are those of
> the author. The message is intended for the addressee only and its
> contents and any attached files are strictly confidential. If you have
> received it in error, please telephone the number above. Thank you.
>
>
> **********************************************************************
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:21 EDT