The 3xport GE is support from 12.0(11)S3.
Alex Yeung
-----Original Message-----
From: micky [mailto:micky@apol.com.tw]
Sent: Sunday, October 28, 2001 3:54 PM
To: Alex Yeung; boris@apol.com.tw
Cc: cisco-nsp@puck.nether.net
Subject: Re: [nsp] Cisco GSR12012 support 3port GE line card ?
Hi Alex Yeung
Which os are you running ?
Somebody told me about ios12.0.15s2 at least if want to use 3 port GE
linecard on GSR12012
Thanks
Micky
----- Original Message -----
From: Alex Yeung
To: micky ; cisco-nsp@puck.nether.net
Sent: Saturday, October 27, 2001 2:25 AM
Subject: RE: [nsp] Cisco GSR12012 support 3port GE line card ?
Micky,
All GSR chassis support the 3 port GE. The message you saw on the LC LED
indicates that the IOS has been downloaded from the GRP to the LC and is
running in the DRAM, however the LC itself is not enabled yet and not ready
for use.
Look at the outputs of the following command:
sh diag <slot#>
sh gsr slot <slot#>
sh controller fia, look for crc16 errors
Have you tried in a different slot?
Alex Yeung
-----Original Message-----
From: micky [mailto:micky@apol.com.tw]
Sent: Friday, October 26, 2001 3:24 AM
To: cisco-nsp@puck.nether.net
Subject: [nsp] Cisco GSR12012 support 3port GE line card ?
Hi Mr.nsp
My GSR12012 is running IOS ver 12.0.15s1
When I finished inserting the line card,I found card was detected
by IOS
But the front panel led showed "up" ,not "run"
It's very strange,this caused GE port to be down
Anyone about this condition ?
Thanks
Have a nice weekend
Micky
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:52 EDT