RE: [nsp] get traffic counters on VLANs via SNMP

From: Kinczli Zoltán (Zoltan.Kinczli@Synergon.hu)
Date: Mon Oct 29 2001 - 06:33:16 EST


Hello,

   Anyone out there using CAR to "successfully" measure the load of a
GE-IP+
sub interface? In theory it works...

   Anyway, if you measure the sub i/f load with CAR mib what ios are you
running?

thnks, rgrds
  --Zoltan

-----Eredeti üzenet-----
Feladó: Dmitri Kalintsev [mailto:dek@hades.uz]
Küldve: 2001. október 26. 1:15
Címzett: cisco-nsp@puck.nether.net
Tárgy: Re: [nsp] get traffic counters on VLANs via SNMP

Use CAR and read CAR snmp counters.

On Thu, Oct 25, 2001 at 04:50:13PM +1100, Roman Volkov wrote:
> Hello all!
>
> I have next problem - I need in traffic amount counting on VLAN
subinterfaces
> on 3660 router (IOS 12.2(3) IP PLUS)
> On interfaces like Serial or Ethernet i am counting it throught SNMP
> by ifInOctets and ifOutOctets
> but for VLANS i see interfaces in ifIndex and ifName, but
> ifInOctets and ifOutOctets don't have values for it ifIndex value.
>
> May be I should change IOS version or use special OID for request
traffic
> counters?
>
> Help me please...
> --
> Roman Volkov, CCNA, <rv@kht.ru> - http://home.kht.ru/~rv
> Khabarovsk TTS, http://net.kht.ru
> Russia
---end quoted text---

SY,

-- 
 CCNP, CCDP (R&S)                          Dmitri E. Kalintsev
 CDPlayer@irc               Network Architect @ connect.com.au
 dek @ connect.com.au    phone: +61 3 9674 3913 fax: 9251 3666
 http://-UNAVAIL-         UIN:7150410    cell: +61 414 821 382



This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:52 EDT