Re: [nsp] 1000baseT GBIC

From: Ryan O'Connell (roconnell@demo.eu.blackberry.net)
Date: Sat Nov 03 2001 - 03:31:23 EST


Are there any plans to produce/upgrade line cards for other switches (4k and 6ks particularly) that can take copper GBICs? I'd certainly find that useful...

-----Original Message-----
From: Ian Cox <icox@cisco.com>
Date: Fri, 02 Nov 2001 14:08:47
To: Simon Lockhart <simonl@rd.bbc.co.uk>, cisco-nsp@puck.nether.net
Subject: Re: [nsp] 1000baseT GBIC

At 05:29 PM 11/2/2001 +0000, Simon Lockhart wrote:
>Does anyone know if you can use the WS-G5482 1000baseT GBIC in anything
>other than a switch? The documentation says switch only, but it'd be far
>more useful if I could also use it in a PA-GE or a GSR GigE linecard.

The copper GBIC currently available for the Cat2900 and Cat3500XL is not
supported in any other products. The reason it is not supported is that it
requires a much larger current draw than a the GBIC standard specifies. All
other GBIC interfaces currently shipping on products do not provide enough
power for the WS-G5482 1000baseT GBIC. The Cat2900 and Cat3500XL were
engineered to allow for extra power requirements of this GBIC.

Ian

>Simon
>--
>Simon Lockhart | Tel: +44 (0)1737 839676
>Internet Engineering Manager | Fax: +44 (0)1737 839516
>BBC Internet Services | Email: Simon.Lockhart@bbc.co.uk
>Kingswood Warren,Tadworth,Surrey,UK | URL: http://support.bbc.co.uk/

__________________________
BlackBerry Wireless Email!
www.blackberry.net



This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:53 EDT