yes.
Alex
-----Original Message-----
From: Desmarais, Jonathan [mailto:JDesmarais@colt-telecom.com]
Sent: Thursday, December 13, 2001 2:07 PM
To: cisco-nsp@puck.nether.net
Subject: [nsp] 2924M XL DC
I am trying to find clarity on the trunk functionality of the Cat 2924M
switch.
The documentation
(http://www.cisco.com/warp/public/cc/pd/si/casi/ca2900xl/prodlit/2924m_ds.ht
m)
ambiguously states that "All interfaces" support ISL/802.1q trunks, however
the statement is in a bullet point specifically about the modular high-speed
slots.
Does anyone use the 2924M XL with the base unit 10/100 interfaces (F0/0-23)
configured
in trunk mode?
Regards
Jon
Jonathan Desmarais
UK Data Engineering
COLT Telecommunications
**********************************************************************
COLT Telecommunications
Registered in England No. 2452736
Registered Office: Bishopsgate Court, 4 Norton Folgate, London E1 6DQ
Tel. 020 7390 3900
This message is subject to and does not create or vary any contractual
relationship between COLT Telecommunications, its subsidiaries or
affiliates ("COLT") and you. Internet communications are not secure
and therefore COLT does not accept legal responsibility for the
contents of this message. Any view or opinions expressed are those of
the author. The message is intended for the addressee only and its
contents and any attached files are strictly confidential. If you have
received it in error, please telephone the number above. Thank you.
************************************************************************
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:57 EDT