[nsp] REG: WCCP Version 2.0

From: Vinod Anthony Joseph Cherunni (vac@antarix.biz)
Date: Wed Jan 02 2002 - 08:32:37 EST


Dear All,

I am trying to establish a WCCP channel between a Cisco 7206-VXR router, &
a SQUID Proxy system. When i set the wccp version to 2.0 on the router, I
find that the router id & the router detects itself as a WCCP router. But
when i set the version to 2.0, I get the following output of the command
"sh ip wccp" -

Global WCCP information:
    Router information:
        Router Identifier: -not yet determined-
        Protocol Version: 2.0

    Service Identifier: web-cache
        Number of Cache Engines: 0
        Number of routers: 0
        Total Packets Redirected: 0
        Redirect access-list: -none-
        Total Packets Denied Redirect: 0
        Total Packets Unassigned: 0
        Group access-list: 9
        Total Messages Denied to Group: 0
        Total Authentication failures: 0

Also i get an error msg as follows -
"WCCP-EVNT:???:Unknown msg_type 7 on Tunnel0 from 192.168.123.2"

Kindly advise.

With warm regards,

Vinod.



This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:58 EDT