On Fri, Jan 18, 2002 at 04:22:29PM -0000, Mike Holdsworth wrote:
> Hi Everyone,
>
> Is there a command that can be used to make the PA-A3-OC3MM Interface work
> in a Simplex Mode?
I don't see why not as long as there is no oam configured.
> What I want to do is only use Transmit with a cellrate of 90Mbps, and plug
> this into an ATM Switching Device (Metrodata LA1000). This then plugs into
> an ASI Satellite Modem, and at the far end is a Demodulator and similar
> LA1000 unit and Cisco 7500.
>
> The LA1000 unit can be configured to work in Simplex Mode and mask alarms
> from its unused RX ASI Port. Can the Cisco OC-3 Interface be configured to
> shut down or administratively down the RX Port on its OC-3 MM, without
> having any errors?
just have something transmit idle to the pa-a3-oc3mm board.
> The IOS on the Cisco is version 12.0.19
>
> Any ideas would be appreciated.
>
> Mike Holdsworth - Pre-Sales Engineeer - Metrodata Satellite & Wireless
> Division
- jared
-- Jared Mauch | pgp key available via finger from jared@puck.nether.net clue++; | http://puck.nether.net/~jared/ My statements are only mine.
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:00 EDT