I am trying to monitor the number of active connections on the PRI
interface on the cisco 4700 routers. The OID I used is
1.3.6.1.4.1.9.10.19.1.1.4.0. I received an error code "No value(s) returned
for query" when I used the Openview server to query the OIDs. This OID is
under cisco pop mgmt and according to cisco website, it was support 1st on
IOS 11.2 and then IOS 12.2.
Do anyone encounter this problems before and what are the solutions?
Regards
Ang Lian Ann
DID 3191083
NOTE: Privileged/Confidential Information may be contained in this message.
If you are not the addressee indicated in this message (or responsible for
delivery of the message to such person), you may not copy or deliver this
message to anyone. In such case, you should destroy this message and kindly
notify the sender by reply email. All opinions, conclusions and other
information expressed in this message not of an official nature shall not
be deemed as given or endorsed by SPH unless otherwise indicated by an
authorised representative independent of this message.
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:02 EDT