-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Pakaj:
Verify the duplex and the speed on both sides. Make sure they are
setup to the same settings.
100 full on router side and 100 full on switch side.
This should remove the errors (assumption there is not a bad card on
the router).
==DMT>
- ----SIGNAURE-------
Douglas M. Todd, Jr.
CCNP
Network Engineering
Partners Health Care
Building 149
149 13 Street
Charlestown, MA 02129-200
Tel: 617.726.1403
Email: dtodd@partners.org
- --------------------------------------------------------------------
PGP Finger Print: 9429 CAE3 B2D1 C2E1 DFBC E7A6 E90A 9BE5 C7B6 47BC
Key
available:http://keyserver.pgp.com:80/pks/lookup?op=get&exact=off&sear
ch=dtodd%40partners.org
Verisign S/N: 3ff65cdf58b9dceda004baeed49e16cf
https://digitalid.verisign.com/services/client/index.html
>-----Original Message-----
>From: pankaj [mailto:pankaj@worldgatein.net]
>Sent: Wednesday, February 13, 2002 11:05 AM
>To: cisco-nsp@puck.nether.net
>Subject: [nsp] undesirable trafice
>
>
>cisco catalyst2612XL Switch
>|fastethernet0/7
>|
>rotuer fastehternet0/0
>
>Here router's ethernet port is dircetly connected with switch's 0/7
>port using dlink cat5ethernet cable(RJ-45)
>
>now my router ethernet showing input rate 100000 bits/sec
>and at the same time on switch fastehternet0/7 showing output rate
>251000 bits/sec
>Since from last one or two hours this is happening....
>
>How this can happen ,, ,,,,,,,,,,,,,
>any ideas will help me...
>
>----pankaj
-----BEGIN PGP SIGNATURE-----
Version: PGP 7.0
iQA/AwUBPG1FoQgiZycqTvq3EQIxgQCfa/nePQugltXWxN/CJlFQOEqMxYIAniVB
lcQNcFYmmrgEnJviZMPQJIvB
=uDZN
-----END PGP SIGNATURE-----
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:05 EDT