Try removing and readding access groups to interface after enabling DCEF..
In my situation - 12.0(17)S - 7513, if the router reboots or you toggle CEF
distributed the access-lists stop working until you
interface FastEthernet9/1/0
no ip access-group fa_9_0_in in
no ip access-group fa_9_0_out out
ip access-group fa_9_0_in in
ip access-group fa_9_0_out out
exit
Cisco tac admitted it, but would not put it in writing or give me the bug
number...
-----Original Message-----
From: FreeLSD [mailto:dimka@freelsd.net]
Sent: Tuesday, February 26, 2002 11:21 AM
To: cisco-nsp@puck.nether.net
Subject: [nsp] ACL stop working
75xx
IOS 12.0(19)ST2 (same for 12.0.18S*)
RSP8 with VIP4-80 (1 FastEthernet)
BGP, OSPF
extended ACL on interfaces FastEthernet (in/out, not compiled/compiled).
if cisco running with 'ip cef distribute' all access-lists stop working at
all.
with 'ip cef' seems worked right.
did anybody have any idea what bug ID is it?
Signed,
Dimka
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:06 EDT