RE: [nsp] 3620, 12.0(21)S1, VLANs

From: Kevin Gannon (kgannon@lancomms.ie)
Date: Wed Feb 27 2002 - 05:26:18 EST


Charles,
For some reason you need enterprise/IP Plus to run dot1q.
The S stream team must not think SPs use dot1q.

I choose Enterprise as I needed other S stream type
features like IPv6 but IP+ should also work. You can check
the various combinations for yourself at

http://www.cisco.com/fn/

Hint. Look for IEEE 802.1q

Regards,
Kevin

-----Original Message-----
From: Charles Sprickman [mailto:spork@inch.com]
Sent: 26 February 2002 19:44
To: cisco-nsp@puck.nether.net
Subject: [nsp] 3620, 12.0(21)S1, VLANs

Hi,

I have the above version of SW on a 3620 and a 7206. On the 7206, I am
able to create vlans on my FE interfaces (ie : in faste 1/0.2 -> encaps
dot1q etc.). On the 3620, the "encapsulation" command is not available.

Am I missing something or does the service provider version version not
support vlans on the 3620? If it does not, what's a good version that
will get me ssh, the snmp fix, vlans and ospf with few other frills?

Thanks,

Charles

| Charles Sprickman | Internet Channel
| INCH System Administration Team | (212)243-5200
| spork@inch.com | access@inch.com

**********************************************************************
This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error please notify
the system manager.

This footnote also confirms that this email message has been swept for the
presence of computer viruses.

For more information contact postmaster@lancomms.ie

phone + 353 1 4093000

fax + 353 1 4093001

**********************************************************************



This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:06 EDT