[nsp] ATM, UBR and correct setting

From: TMS (tomek@absolut.iksik.net)
Date: Fri Mar 01 2002 - 04:53:04 EST

Next message: Tom Scott: "PIM SM rendezvous point"
Previous message: Mati Gil: "RE: [nsp] cisco vpn client"
Next in thread: TMS: "[nsp] ATM, UBR and correct setting"
Maybe reply: TMS: "[nsp] ATM, UBR and correct setting"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

Hello

I have small question. I have client connected to my router
via ATM-OC3. And I have to set this link speed to 2mbps.
What UBR setting I should use ? Now I using 2000, is this
setting is correct ?

Next message: Tom Scott: "PIM SM rendezvous point"
Previous message: Mati Gil: "RE: [nsp] cisco vpn client"
Next in thread: TMS: "[nsp] ATM, UBR and correct setting"
Maybe reply: TMS: "[nsp] ATM, UBR and correct setting"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:06 EDT